BN-030 copper sheet silver corrosion
BN-030 petroleum product copper sheet silver sheet corrosion tester
I. Overview
1. This instrument is designed and manufactured according to GB/T 5096 , ASTM D130 and SH/T 0023 standards. It is suitable for determining the corrosiveness of petroleum products on copper and silver sheets. It is an indispensable instrument for oil analysis in petrochemical, transportation, national defense and scientific research industries.
2. The environmental conditions for the instrument use are: ambient temperature 5 ~ 40 °C , humidity ≤ 85% , working power supply AC220V ± 10% , 50Hz .
Second, structural characteristics
1. The constant temperature bath inner cylinder is made of stainless steel, which is resistant to corrosion and oxidation. The aluminum silicate insulation material is filled between the cylinder and the outer casing, and the heat preservation performance is good. The stirring device adopts a plum-shaped stirring blade, and the stirring effect is good.
2 , the constant temperature bath adopts the heating method inside the heating tube, the platinum resistance sensor, the digital temperature display table LED shows the bath temperature, and is equipped with an auxiliary heater, which can accelerate the heating rate. The temperature is continuously adjustable.
3 , using a four-hole bath cover for copper corrosion test, can hang two test bombs and six test tubes at the same time. A two-hole bath cover is used for the silver sheet corrosion test, and two test tubes can be placed at the same time.
4. The test bomb and test tube rack are made of stainless steel.
5. The interior of the condenser is equipped with a high-efficiency cooling system to minimize the loss of moisture in the bath due to evaporation.
6. The cooling circulating water is controlled by a peristaltic pump, and the flow rate is stable and accurate.
Third, technical parameters
Ø Temperature control range: room temperature ~ 100 °C
Ø Temperature control accuracy: ± 1 °C
Ø Heater power: temperature control heating 1000W auxiliary heating 800W
Ø Dimensions: 360 × 270 × 490 (mm)
Ø Weight: 15Kg
Fourth, the configuration
Serial number |
Name |
Quantity |
1 |
Host |
1 set |
2 |
Fuse Φ 6 × 30 10A |
1 Ge |
3 |
sensor |
1 Zhi |
4 |
Small bath |
1 set |
5 |
Copper cover, silver cover |
Each 1 Ge |
6 |
Hanging cover assembly |
2 sets |
7 |
Tube holder |
4 sets |
8 |
Test bomb |
2 sets |
9 |
Thermometer rubber stopper |
1 Ge |
10 |
Thermometer 0 ~ 100 ° C |
1 Zhi |
11 |
Observation tube |
1 Zhi |
12 |
Copper tube test tube |
Each of the 12 Ge |
13 |
Silver test tube |
2 sets |
14 |
Instruction manual, certificate of conformity |
Each 1 part |
Copyright©2019 Bahnen Instrument All Rights Reserved 辽ICP备14001087号 Powerby:300.cn dalian